Product Benefits:SAVE HUNDREDS OF GALLONS OF WATER!
-
Lift dirt from your vehicle - without water!
-
Cleans, polishes & protects all in one easy step!
-
Tri-Wash can be used without water on any hard,
non-porous surface.
-
Will not scratch paint!
-
You can use it on cars, boats, recreational vehicles, trucks, skis, buses, motorcycles, airplanes, and much more!
Tri-Wash FAQs
Tri-Wash’s molecular structure makes it an extremely effective automobile "wax" or glaze. The product contains a complex mixture of cleaning elements along with the glaze ingredients. With proper application,
Natureline Tri-Wash™ lifts dirt from the vehicle by literally surrounding dirt molecules, lifting them from the paint surface, before you start to wipe. During the application process a chemical reaction occurs that results in an extremely shiny, highly protective glaze finish. All this happens very rapidly due to the specially formulated ingredients within
Natureline Tri-Wash™ itself. The application process need not involve high pressure or extensive rubbing. The application process also does not require using high volume of product. By following product usage directions you are guaranteed that
Natureline Tri-Wash™ will perform as indicated. Upon initial use your vehicle will shine more than before Tri-Wash was applied and water will bead on it.
A revolution in car care; cleans, protects & polishes without the use of water!
Natureline Tri-Wash™ is a combination car wash, polish and protective glaze which is applied directly to a dirty surface without the use of water. It contains no waxes, nor is it simply apolish. Waxes do a good job of "protecting" but often leave the paint dull. Polishes are great at removing minor stains and blemishes, and are much more capable of rejuvenating dull paint. Polishes often are abrasive, and provide very little protection on the paint surface. Paint sealants protect very well, but cannot clean or polish. Tri-Wash does it all! Normally a vehicle's paint must be virtually pristine before the sealants can be applied.
Natureline Tri-Wash™ combines the best features of waxes, polishes and paint sealants without any of the drawbacks.
So how does it work?
Natureline Tri-Wash™ contains many beneficial ingredients, including wetting agents, lubricants and protectants. The detergents and wetting agents in
Natureline Tri-Wash™ combine to soften and dissolve surface grime, while a specific proprietary blend of fluids and lubricants bond on the molecular level to the cleaning surface. This proprietary formula is a technological breakthrough stemming from years of research and development.
Natureline Tri-Wash™ provides a layer of protection in the form of a molecular bond with the surface against any remaining abrasive not broken down by the detergents and wetting agents.
Natureline Tri-Wash™ Product Usage
Hand Directions:
1. Apply
Natureline Tri-Wash™ to a cool, dry surface in a shaded area if possible.
2. Use two soft, clean terry cloth towels... one for cleaning/polishing and one for buffing.
3. Spray a generous coat of
Natureline Tri-Wash™ on a small section of vehicle (2-3 sq. ft.), spraying with a broad sweeping motion where possible.
4. On windows, apply a light coat.
5. With moderately firm pressure, rub
Natureline Tri-Wash™ thoroughly over the sprayed area until the filmy haze that appears almost disappears.
6. Buff the remaining haze to a high gloss with second terry cloth towel.
Buffer Directions:
1. Use a conventional or orbital-type buffer equipped with a foam polishing pad. (Do not exceed 2,400RPM)
2. Apply Natureline Tri-Wash™ as described in step 3 above.
3. Immediately buff sprayed area to a high gloss.
4. Continue, section by section, until all accessible areas have been buffed.
5. Polish any remaining areas by hand, if necessary.
Tri-Wash Frequently Asked Questions